Hot Mirrors
Abrisa Technologies can supply hot mirrors or short wave pass filters (SWP) for heat control applications. For hot mirrors, a thin film coating is applied to a glass substrate, such as soda-lime or borosilicate, in order to reflect infrared radiation either as a means to harness the reflected wavelengths for an application or remove them from an application. Simplified, a hot mirror will separate visible light from heat. Hot mirrors are typically provided on a cut to order basis in thicknesses of 1.1 mm, and 3.3mm and in diameters up to 27”. Custom sizes and thicknesses and specialty designs are available upon request.
Features
- High transmission for the visible light range
- High reflection of infrared
- Heat resistant borosilicate glass substrates – SCHOTT Borofloat®
- Thin film dielectric multi-layer coating
- Standard angles of incidence are 0 and 45 degrees
Specifications
HM-VS-950 Hot Mirror
Hot mirror filters transmit the visible spectrum and reflect the infrared at normal incidence. The average transmittance is specified to be more than 93% from 425 to 675nm and average reflectance is more than 95% from 750 to 950nm. Custom angles of incidence can be designed to specification.
HM-VS-1150 Hot Mirror Filter
These hot mirror filters transmit the visible spectrum and reflect the infrared at 0 degrees. The average transmittance is more than 93% from 425 to 675nm. The average reflectance is more than 95% from 750 to 1150nm. Custom angles of incidence can be designed to specification.
HM-VS-1500 Hot Mirror – Obsolete Contact Factory
Extreme performance hot mirrors offer enhanced UV blocking.
Average T ≥85% 420-680nm
Average T ≤1% 200-380nm
Average R ≥95% 730-1500nm
HM-VS-1500 B Extended Range Hot Mirror
A two-sided coating solution, coated upon special request on Borofloat® or fused silica of our supply or customer furnished material on sizes up to 27” diagonal and thicknesses of > 1.1mm.
Avg. T ≥ 85% 425 – 675nm
Avg. T ≤ 5% 750 – 1150nm
Avg. T ≤ 10% 1150 – 1600nm
At normal incidence
HM-VS-1600 Hot Mirror Filter
Extended Hot mirror filters transmit the visible spectrum and reflect the infrared at normal incidence. The average transmittance is specified to be more than 85% from 425-675nm and average reflectance is more than 90% from 750-1150nm and 80% from 1150-1600nm. Custom angles of incidence can be designed to specification.
HM-VS-3000 Hot Mirror Filter
Our HM-VS-3000 filter combines reflectance and absorptance to block a very wide band in the infrared while maintaining good visible transmittance.